1. Preparation before applying the wallpaper Remove the outlet switch plate in advance and wipe the substrate clean. The floor gets wet because it uses water. If you are concerned, please use a gloves
2. Wet the wallpaper Put water in a bucket or the like to wet the wallpaper. Once wet, align the bevels together and gently squeeze them to make them creased.
3. Apply the paste for about 5 to 10 minutes.
4. Stick a piece Check the top and bottom of the handle, and stick it from the left end to the end.
5. Paste the second and subsequent pieces Align the patterns, and stick them with overlapping wallpaper.
6. Cut the excess Paste down to the bottom , cut the remaining part by squeezing.
7. Finish Repeat 4 to 6 and paste it all over the wall.